Welcome!

All Categories » Electronics
Quad 20 Amp, 500 V DC low-side switch

Our Quad N-MOSFET power switch is rated for a maximum of 20 Amps and 500 Volts per switch.

The switch includes a logic level ( 0 Volt to 5 Volt) to Power MOSFET level ( 0 V to 12 V ) converter to allow the switch to be used for high frequency PWM operations.

The switch features two huge huge protection diodes to support driving inductive loads.

All of the inputs have protective resistors tieing the inputs to ground when not connected to a logic signal (eliminates accidentally Turing the switch on during reboots or micro-controller initialization).

We have included LED indicator lights at all signal junctions to promote rapid debugging when using this switch in a new project.

This switch demonstrates the versatility of 3D printed Printed Circuit Boards by providing "lots of surfaces" to use for making electrical connections.

We have used thick (2 mil) copper to create the high current traces on this switch.

Printing this design is straight forward.... Assembling the circuit is 100% manual effort (no fancy robots are used).

This is for the physical Quad DC Switch => We ship it to you!


Price: $1,200.00
Quantity:  
Quad 20 Amp, 500 V DC low-side switch (Personal Use)

Our Quad N-MOSFET power switch is rated for a maximum of 20 Amps and 500 Volts per switch.

The switch includes a logic level ( 0 Volt to 5 Volt) to Power MOSFET level ( 0 V to 12 V ) converter to allow the switch to be used for high frequency PWM operations.

The switch features two huge huge protection diodes to support driving inductive loads.

All of the inputs have protective resistors tieing the inputs to ground when not connected to a logic signal (eliminates accidentally Turing the switch on during reboots or micro-controller initialization).

We have included LED indicator lights at all signal junctions to promote rapid debugging when using this switch in a new project.

This switch demonstrates the versatility of 3D printed Printed Circuit Boards by providing "lots of surfaces" to use for making electrical connections.

We have used thick (2 mil) copper to create the high current traces on this switch.

Printing this design is straight forward.... Assembling the circuit is 100% manual effort (no fancy robots are used).

This is the 3D Model for you to print and use.

Note: This product does not convey any resale rights


Price: $10.00
Quantity:  
Quad 20 Amp, 500 V DC low-side switch (Resale rights)

Our Quad N-MOSFET power switch is rated for a maximum of 20 Amps and 500 Volts per switch.

The switch includes a logic level ( 0 Volt to 5 Volt) to Power MOSFET level ( 0 V to 12 V ) converter to allow the switch to be used for high frequency PWM operations.

The switch features two huge huge protection diodes to support driving inductive loads.

All of the inputs have protective resistors tieing the inputs to ground when not connected to a logic signal (eliminates accidentally Turing the switch on during reboots or micro-controller initialization).

We have included LED indicator lights at all signal junctions to promote rapid debugging when using this switch in a new project.

This switch demonstrates the versatility of 3D printed Printed Circuit Boards by providing "lots of surfaces" to use for making electrical connections.

We have used thick (2 mil) copper to create the high current traces on this switch.

Printing this design is straight forward.... Assembling the circuit is 100% manual effort (no fancy robots are used).

This is the 3D Model for you to print and resell.

Note: This base price conveys the right to resell 10 units


Price: $30.00
Resell Quantity :
Quantity:  
Quad 20 Amp, 500 V DC low-side switch (Intellectual Property)

Our Quad N-MOSFET power switch is rated for a maximum of 20 Amps and 500 Volts per switch.

The switch includes a logic level ( 0 Volt to 5 Volt) to Power MOSFET level ( 0 V to 12 V ) converter to allow the switch to be used for high frequency PWM operations.

The switch features two huge huge protection diodes to support driving inductive loads.

All of the inputs have protective resistors tieing the inputs to ground when not connected to a logic signal (eliminates accidentally Turing the switch on during reboots or micro-controller initialization).

We have included LED indicator lights at all signal junctions to promote rapid debugging when using this switch in a new project.

This switch demonstrates the versatility of 3D printed Printed Circuit Boards by providing "lots of surfaces" to use for making electrical connections.

We have used thick (2 mil) copper to create the high current traces on this switch.

Printing this design is straight forward.... Assembling the circuit is 100% manual effort (no fancy robots are used).

This is the 3D Model (STL), the Design Source Model (STEP), the parts list, the wiring diagram (schematic) and 20 hours of our consulting time for you to do whatever you want: Manufacture & Sell as many units as you deem appropriate

This is for non-exclusive intellectual property rights. Feel free to contact us for a quote for exclusive Intellectual Property rights


Price: $5,000.00
Quantity:  
Power Supply Base (Resale Rights)
Power Supply Base (Resale Rights)

This is a very simple idea: Create a "Lego" approach to building prototypes that allows designers to focus on key elements while incrementally testing and refining their concepts into a product.

If the first step in your design prototyping process is assembling a platform so that you may begin the design implementation process (Our method for years) you realize that the first hours (or days) is consumed with tasks that have nothing to do with seeing your idea come to life

Our Power Supply Platform incorporates a standard square peg pattern that allows rapid "plug and play" development of both electrical and mechanical design concepts

Our Power Supply incorporates a heavy duty toggle switch (on/off) and standard American plug receptacle (We also include a standard 110V three prong plug)

When our Power Supply Platform is combined with our other prototyping tools you will gain the ability to focus on the key elements of your design instead of the "steps to get going"

This is the 3D Model (STL), the parts list and the wiring diagram (schematic) so that you may 3D Print and Sell

No hardware is included: You will need to source the power plug, the toggle switch, the AC power inlet, some 14 Ga wire and some stainless steel bolts (power terminals) to complete the design

This product is for a specific Resale Quantity (You may always order more if you Resale the Quantity you purchase)


Price: $20.00
Resale Quantity :
Power Supply Base (Personal Use)
Power Supply Base (Personal Use)

This is a very simple idea: Create a "Lego" approach to building prototypes that allows designers to focus on key elements while incrementally testing and refining their concepts into a product.

If the first step in your design prototyping process is assembling a platform so that you may begin the design implementation process (Our method for years) you realize that the first hours (or days) is consumed with tasks that have nothing to do with seeing your idea come to life

Our Power Supply Platform incorporates a standard square peg pattern that allows rapid "plug and play" development of both electrical and mechanical design concepts

Our Power Supply incorporates a heavy duty toggle switch (on/off) and standard American plug receptacle (We also include a standard 110V three prong plug)

When our Power Supply Platform is combined with our other prototyping tools you will gain the ability to focus on the key elements of your design instead of the "steps to get going"

This is the 3D Model (STL), the parts list and the wiring diagram (schematic) so that you may 3D Print for your own usel

No hardware is included: You will need to source the power plug, the toggle switch, the AC power inlet, some 14 Ga wire and some stainless steel bolts (power terminals) to complete the design

This product is for Personal Use only


Price: $6.00
Power Supply Base (Intellectual Property Rights)
Power Supply Base (Intellectual Property Rights)

This is a very simple idea: Create a "Lego" approach to building prototypes that allows designers to focus on key elements while incrementally testing and refining their concepts into a product.

If the first step in your design prototyping process is assembling a platform so that you may begin the design implementation process (Our method for years) you realize that the first hours (or days) is consumed with tasks that have nothing to do with seeing your idea come to life

Our Power Supply Platform incorporates a standard square peg pattern that allows rapid "plug and play" development of both electrical and mechanical design concepts

Our Power Supply incorporates a heavy duty toggle switch (on/off) and standard American plug receptacle (We also include a standard 110V three prong plug)

When our Power Supply Platform is combined with our other prototyping tools you will gain the ability to focus on the key elements of your design instead of the "steps to get going"

This is one of our designs that simply begs to be mass produced

This is the 3D Model (STL), the Design Source Model (STEP), the parts list, the wiring diagram (schematic) and 10 hours of our consulting time for you to do whatever you want: Manufacture & Sell as many units as you want

No hardware is included: You will need to source the power plug, the toggle switch, the AC power inlet, some 14 Ga wire and some stainless steel bolts to complete the design

This product is for the non-exclusive Intellectual Property Rights to our Power Supply Platform


Price: $3,500.00
Arduino Mega / Dual Solderless Breadboard with Mount (Physical Product)
Arduino Mega / Dual Solderless Breadboard with Mount (Physical Product)

Our Arduino Mega, Dual Breadboard Add-on to our Prototyping Power Supply Base unit allows you to start developing your design immediately.

Our Mount uses a sliding post design that provides positioning flexibility as well as "fit flexibility": Breaking News: Not all Arduino Mega Boards are the same width.... not all Breadboard are the same width (or length).

Our Physical Product includes:

  • One Arduino Mega micro-controller
  • Two 6.75" x 2.125" breadboards
  • Mount: Fits our Prototyping Power Supply base ( Four 3D printed pieces )

This is the physical product ( Complete and ready to be used when it arrives at your door )


Price: $60.00
Quantity:  
Arduino Mega / Dual Solderless Breadboard with Mount (3D Model for Personal Use)
Arduino Mega / Dual Solderless Breadboard with Mount (3D Model for Personal Use)

Our Arduino Mega, Dual Breadboard Add-on to our Prototyping Power Supply Base unit allows you to start developing your design immediately.

Our Mount uses a sliding post design that provides positioning flexibility as well as "fit flexibility": Breaking News: Not all Arduino Mega Boards are the same width.... not all Breadboard are the same width (or length).

The Personal Use 3D Model is the "Mount" only and does NOT include:

  • One Arduino Mega micro-controller
  • Two 6.75" x 2.125" breadboards

This is the 3D Model for Personal Use


Price: $4.00