All Categories » 3D Models For Resale
Toilet Paper Holder 3D Model (Resale rights)

Bunk House Toilet paper holder that may be mounted horizontally or vertically.

"Bunk House" => It's not "pretty" but it is "functional".

This is for the 3D Model for you to print on your own 3D Printer

This product gives the purchaser the right to 3D print and sell ten units (base price).

Price: $10.00
Resell Quantity :
Soda can tops plus dispenser 3D Model (Resale rights)

These soda can tops fit Pepsi brand soda cans.

12 "tops" plus one dispenser that has magnets to mount to your Fridge

This product is the 3D model plus rights to resell 10 units (base price)

Note: you supply the magnets (K&J Magnetics)

Price: $10.00
Resell Quantity :
Quad 20 Amp, 500 V DC low-side switch (Resale rights)

Our Quad N-MOSFET power switch is rated for a maximum of 20 Amps and 500 Volts per switch.

The switch includes a logic level ( 0 Volt to 5 Volt) to Power MOSFET level ( 0 V to 12 V ) converter to allow the switch to be used for high frequency PWM operations.

The switch features two huge huge protection diodes to support driving inductive loads.

All of the inputs have protective resistors tieing the inputs to ground when not connected to a logic signal (eliminates accidentally Turing the switch on during reboots or micro-controller initialization).

We have included LED indicator lights at all signal junctions to promote rapid debugging when using this switch in a new project.

This switch demonstrates the versatility of 3D printed Printed Circuit Boards by providing "lots of surfaces" to use for making electrical connections.

We have used thick (2 mil) copper to create the high current traces on this switch.

Printing this design is straight forward.... Assembling the circuit is 100% manual effort (no fancy robots are used).

This is the 3D Model for you to print and resell.

Note: This base price conveys the right to resell 10 units

Price: $30.00
Resell Quantity :
Power Supply Base (Resale Rights)
Power Supply Base (Resale Rights)

This is a very simple idea: Create a "Lego" approach to building prototypes that allows designers to focus on key elements while incrementally testing and refining their concepts into a product.

If the first step in your design prototyping process is assembling a platform so that you may begin the design implementation process (Our method for years) you realize that the first hours (or days) is consumed with tasks that have nothing to do with seeing your idea come to life

Our Power Supply Platform incorporates a standard square peg pattern that allows rapid "plug and play" development of both electrical and mechanical design concepts

Our Power Supply incorporates a heavy duty toggle switch (on/off) and standard American plug receptacle (We also include a standard 110V three prong plug)

When our Power Supply Platform is combined with our other prototyping tools you will gain the ability to focus on the key elements of your design instead of the "steps to get going"

This is the 3D Model (STL), the parts list and the wiring diagram (schematic) so that you may 3D Print and Sell

No hardware is included: You will need to source the power plug, the toggle switch, the AC power inlet, some 14 Ga wire and some stainless steel bolts (power terminals) to complete the design

This product is for a specific Resale Quantity (You may always order more if you Resale the Quantity you purchase)

Price: $20.00
Resale Quantity :